Skip to navigation Skip to main content

Design line - technical details


A metal structure is an assembly of metal whose purpose is to support the constraints of the building and any external constraints, such as wind, snow and seismic activity. For each external constraints there is a maximum value supported by the structure. It is the same building constraints (maximum number of floors, maximum operating expenses, etc ....). Here is a view of the two structures TD and TE related to the Design range.

Structure is mainly composed of three types of rooms: the key pieces that support all efforts / secondary parts that do not support that part of the efforts and trim parts, used for sealing or fixing components. All structures have the same logic and switching



The second item that characterizes our products and our range is the outer wall. Design range is performed with a linear system of walls integrally referred to as "full wall." These walls are secured to the structure by screws. They consist of a wooden frame, which we kind of insulation glass wool. Part of the wall facing the outside will be dressed in a breathable Tyvek and siding installed on site in the majority of cases (profiles will be fixing cladding factory). The inner part will consist of a vapor barrier and delaminated plates Gypsum wood or coated with a white gloss paint. The windows are built and attached to the walls. For this, the walls have a trimmer with good size and cons of a system framework will be used to allow binding and optimum quality.

Once the modules from the installed, poles module connection-module will be covered in order to give the appearance of a single piece and hide the internal junctions. The diagram below shows a section of two containers with the system to hide the modular aspect.

The system offers full wall limited flexibility: the ability to reconfigure the product after a lease is possible, but the cost and time required to be taken into account, hence the fact that this line is oriented to the sale and complex demands . The major advantages are the thermal insulation provided is efficient and compatible with the standards heavier. Linear thermal bridges are minimized at the walls. More linear appearance inside and outside greatly increases the perceived quality and provides a quality similar to traditional building with interior and exterior walls of very large continuous lengths possible.



The product range Design offer a roofing system called dry with a flow of water through the corners, the four corners of the module. A roof structure is mainly composed of four beams, pieces of angle type Isobox technology (similar to maritime containers), joists used to support the load on the roof (like snow or a person for maintenance), Standard insulating glass wool placed between the joists and 0.6mm plates used to cover the whole. Efforts related to the weight of the snow will be taken by the system of joists. It is the same for the weight of any individual to perform maintenance operations.
The flow of water through the rails will, also serving as gutters. The water is then discharged through holes in the corner pieces to flow Isobox finally into tubes. The final disposal will be the 4 corners bottom of the module, they can be connected with the foundation drainage system of rainwater client.
The structure of the roof, for this range, allows an individual to a maximum weight of 120kg to walk over. The maintenance and installation of equipment may therefore be more easy with a lifeline and directly through the roof.



The floor uses the same logic as the roof construction at the metal reinforcement (beams, Isobox, joists, insulation between the joists). By cons it will be covered with plate type wood or OSB CTBH to form the floor. Plates rodent will be put in place between the joists to hold the insulation and prevent access to any animal. Operating expenses will be taken through to the joists. The final water flow will be through the holes in the floor Isobox as explained above.


  • Être appelé
  • Recevoir un devis
  • Nous trouver
  • Modules d'occasion